2 inch diamond drill bit

Stadea CBW110H 2 Inch Concrete Core Drill Bit Diamond Hole Saw For Concrete Brick Block Stone Masonry, Wet 5/8"-11 Threaded 14" High

Buy 2 inch diamond drill bit
Check Price on Amazon
Buy 2 inch diamond drill bit from Amazon.com

Description:

Stadea Series Standard C, 14 inch long - 2 inch diamond core bits are designed for coring cutting concrete, bricks blocks and soft to medium hard material. It has 5/8"-11 thread for connection. The core barrel is 14 inch long, the diamond segments are high frequency welded for stonger bond. It works effectively on cutting hole in soft to hard concrete, stones, bricks, blocks, mansonry.

About STADEA
STADEA offers industrial diamond tools, power tools, and wide range of tools accessories. STADEA durable, aggressive diamond tools are used by natural stone fabrication shops, artificial stone manufacturing shops, DIY worldwide.
STADEA trademark is owned by ePortal LLC, Santa Clara CA. STADEA trademark is owned by ePortal LLC, Santa Clara CA.

Buy 2 inch diamond drill bit from Amazon.com
  • 2 Inch Diamond Concrete Core Drill Bit Hole Saw, 14 Inch long Designed for drilling Concrete, masonry, brick, stone, and other soft to medium hard materials
  • High Frequency Welded Diamond Segments for joint strength needed to cut concrete and other soft to medium hard materials effectively
  • 14" High tube length, with 5/8"-11 arbor
  • Designed to cut in wet, for longer life span use wet
  • 5 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 3.5 MM thick and 24 MM wide
Buy 2 inch diamond drill bit from Amazon.com


Drilax 2 Inch Diamond Hole Saw Drill Bit Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain, Coated Core Bits Holesaw DIY Kitchen, Bathroom, Shower, Faucet Installation Size 2"

Buy 2 inch diamond drill bit
Check Price on Amazon
Buy 2 inch diamond drill bit from Amazon.com

Description:

This listing is for individual diamond hole saw - drill bit, you can select the sizes you need. Shank size is 3/8" or less. Drilax tools will fit standard hand drills and press drills.

Pick any size 1", 1-3/16", 1-1/4", 1-3/8,", 1-1/2", 1-5/8", 1-3/4", 2", 2-3/8".

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 " in depth.

Never let your drill bit run dry. Electroplated diamond coating will wear off if the tool gets too hot. Here is how you could use water to keep the tool cool:
a- You can build a mini water pool around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.

EASY TO USE

Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Drilax has a drill bit guide available on Amazon. The guide has a suction base. Just search for "Drilax Drill Guide" on Amazon..

Buy 2 inch diamond drill bit from Amazon.com
  • HIGH QUALITY, DURABLE Diamond Coated Holesaw Tool 2 inches Diameter
  • STANDARD 3/8 inch Shank Use with and standard electric or battery drill.
  • PROFESSIONAL Quality Tool for Drilling Holes in Tiles, Glass, Fish Tanks, Marble, Granite Countertop, Ceramic, Porcelain
  • SAVE OVER 80 Percent for DIY Kitchen, Bathroom, Shower, Faucet Installation Projects
  • Use water as coolant to prolong the tool life, these tools do not need a center pilot drill.
Buy 2 inch diamond drill bit from Amazon.com


DAMO 2 inch Dry Wet Diamond Core Drill Bit for Concrete Granite Marble Hole Saw

Buy 2 inch diamond drill bit
Check Price on Amazon
Buy 2 inch diamond drill bit from Amazon.com

Description:

Although DAMO Dry / Wet Core Bits are designed for use on the job site without using water,wet cutting is recommended whenever possible. They fit on high-speed angle grinders with a 5/8" -11 spindle. Adopting the Vacuum Brazed Tech., they provide the best cutting performance and can drill through the toughest 1-1/4" granite or engineered stone countertop. They can be used to drill the faucet-mounting holes in countertops and vanities. They can also be adapted for use in construction trades wherever holes are needed for water, gas and electrical piping, especially when natural stone, concrete or ceramic tile is already installed. We recommend a template be used when drilling free-hand and a scrap piece of stone be clamped under the stone to prevent excessive chipping on the backside of the stone. Available in 1/4",3/8",1/2",5/8",3/4",7/8",1", 1-1/4", 1-3/8",1-1/2",1-3/4",2",2-1/2" and 3" sizes.

You may buy seperately our core bits adapter to use with the normal electric hand drills which take 3/8" shank.

We DAMO Diamond Tools, LLC holds exclusive distribution to DAMO Trademark products as you can see clearly marked from the picture on the product listing.

Buy 2 inch diamond drill bit from Amazon.com
  • Diameter 2", Max. drilling depth 2";
  • 5/8-11 thread fits on most popular high-speed grinders;
  • Use on the job site without using water;
  • Aggressive cutting on granite and engineered stone;
  • Max. speed 11,000 RPM.


Buy 2 inch diamond drill bit from Amazon.com


Drilax 3 Pcs Diamond Drill Bit Set 1-1/2" , 1-3/4" , 2" for Ceramic, Porcelain Tiles, Glass, Fish Tanks, Marble, Granite, Quartz, Lot 3 Diamond Coated Hole Saws- Kitchen, Bathroom, Shower, Faucet - Holesaws - Wet Drilling Tool Drilax033850

Buy 2 inch diamond drill bit
Check Price on Amazon
Buy 2 inch diamond drill bit from Amazon.com

Description:

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 1/4" in depth.

Shank sizes vary but the largest shank is 3/8" - common electric or rechargable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Buy 2 inch diamond drill bit from Amazon.com
  • PREMIUM QUALITY, LONG LASTING, TALL (DEEPER CUTS) Diamond Hole Saw Drill Bit Tool Set in Elegant PU Zipper Storage Case. High Density Poly Insert Included. You can use it as a guide to keep the hole saw in position.
  • SAVE OVER 80 Percent on MOST POPULAR 3 Sizes: 1 1/2 inch, 1 3/4 inch, 2 inch. Having these sizes available will help you cover almost all of your applications.
  • SPECIAL FEATURE : INCREASED DEPTH of CUT. These hole saws are 30 Percent TALLER (deeper) than most competitors. You can drill through thicker materials with our tools. 1 3/8 inch counter-tops are no problem.
  • EXCELLENT RESULTS in Granite, Ceramic and Porcelain Tiles, Glass, Marble, Slate, and many types of Stones. Shank size is 3/8 inch for common drills (corded electric, cordless rechargeable, upright, other rotary tools)
  • DRILAX BUILT QUALITY. WE ARE HERE TO HELP. Shank sizes vary, maximum shank is 3/8 inch , suitable for all common electric drillers.

Buy 2 inch diamond drill bit from Amazon.com


JINGLING 50mm 2" inch Diamond Coated Tool Drill Bit Hole Saw for Glass Tile Ceramic Marble Color Silver

Buy 2 inch diamond drill bit
Check Price on Amazon
Buy 2 inch diamond drill bit from Amazon.com

Description:

2" inch 50mm Diamond Coated Drill Bit Hole Saw Glass Tile Ceramic Marble Granite
Product Name: 50mm Diamond tip drill bit, 2" inch Glass hole saw bit, Glass drill bit
Product Description:
Hole Diameter: 50mm (close to 2" inch)
Shank Diameter: 10mm(3/8")
Total Length: 55mm(2-3/16")
Drill depth: 26mm depth
Quantity: 1 Piece
Features:
Brand new & high quality
Easy to use, good performance and long life
Excellent for making clean and accurate hole on glass, tile, stone, granite and marble
Works better with an electric drill (Excluding in this item)
Use with water as a lubricant
Drilling speed: drill a hole in seconds
Quick Tips
1. Please add water for coolant and drill slowly
2. Start drill at 45 degree to surface and align to 90 degree as hole forms
3. Never use drills while machine is in hammer action
4. Holes require no futher work as cutting is clean
How to use a hand drill to drill holes in the tile?
Step 1. The bit on the tile 45 degree, open a half-moon notch on it
Step 2. Slowly up the bit to 60 degrees, and then gently drill
Step 3. Reached 90 degrees, continue to drill
Step 4. Drill through the tile finally
Welcome to Visit Our Store:
www.amazon.com/shops/DiamondTools30

Buy 2 inch diamond drill bit from Amazon.com
  • Product Name: 50mm Diamond tip drill bit, 50 mm Glass hole saw bit, 2" inch Glass drill bit
  • Suitable for use in drill hole on glass, tile, ceramic, stone, marble or granite
  • Hole Diameter: 50mm(2");Shank Diameter: 10mm (3/8" );Total Length: 55mm
  • Start drill at 45 degree to surface and align to 90 Degree as hole forms
  • The hole does not need further work because the cut is clean









Buy 2 inch diamond drill bit from Amazon.com


Bosch HDG2 2 In. Diamond Hole Saw

Buy 2 inch diamond drill bit
Check Price on Amazon
Buy 2 inch diamond drill bit from Amazon.com

Description:

Fast and easy starts, even in the hardest materials like porcelain and granite. Quick Change universal hole saw system allows change to any size or type of hole saw in seconds. For use only with machines designed for wet sawing and on a GFCI-protected circuit.

Buy 2 inch diamond drill bit from Amazon.com
  • Vacuum-brazed diamond grit cuts faster and lasts longer
  • Segmented teeth reduce debris and heat
  • Remove material plugs quickly, easily
  • One-inch maximum cutting depth

Buy 2 inch diamond drill bit from Amazon.com


uxcell 2-inch(50mm) Diamond Coated Glass Hole Saw Drill Bits for Ceramic Tile Marble Rock Porcelain

Buy 2 inch diamond drill bit
Check Price on Amazon
Buy 2 inch diamond drill bit from Amazon.com

Description:

1.Cutting tip with AAA Grade diamond particles coatedĀ offers sharp cutting, the efficiency of cutting will be improved greatly.
2.Nickel plated. make it more durable than the general hole saw,segmented design works better and lasts longer.
3.Specifically for glass openings.excellent results in tile.
4.Cut holes smoothly, tidily, with out broken edges and vibration phenomenon.
5.Small incision resistance, increase the speed of cutting holes, easy to decorate after grooving and easy to clean.

Attentions:
1.This glass hole saw needs to be used at a low speed, about 800-1000r per minute.
2.In order to prolong the life of this glass hole saw, when processing, please add into coolant liquids or water.
3.Working without cooling is forbidden.
4.PleaseĀ start your hole diagonally, make a round trace and then hold drill straight.

Specifications
Product Name: Glass Hole Saw
Package Content: 1 x Glass Hole Saw
Main Color: Silver Tone
Material: Metal,Diamond Particles
Coating: Nickel Plated
Speed: 800-1000/RPM
Weight: 91g
Diameter: 50mm/2-inch
Shank Size: 10 x 24mm/0.4-inch x 0.94-inch(D*L)
Total Length: 58mm/2.3-inch
Side Hole Size: 15 x 8mm/0.6-inch x 0.3-inch(L*W)

Buy 2 inch diamond drill bit from Amazon.com
  • SIZE - 50mm(2-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter.
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance.
  • SPECIAL DESIGN - Slotted edge makes it more sharp, works more efficient. Side open can remove the waste to keep the drill bit clean.
  • APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)





Buy 2 inch diamond drill bit from Amazon.com


Raanb 50mm/2" Diamond Coated Drill Bit Hollow Core Hole Saw Extractor Remover Tool for Glass Tile Ceramic Marble

Buy 2 inch diamond drill bit
Check Price on Amazon
Buy 2 inch diamond drill bit from Amazon.com

Description:

Quick Tips 1. Please add water for coolant and drill slowly 2. start drill at 45 Degree to surface and align to 90 Degree as hole forms 3. Never use drills while machine is in hammer action.

Buy 2 inch diamond drill bit from Amazon.com
  • 🔹NoteThe Glass Drill Bit can be used with a standard electric drill (not included), Always use lubrication (water), otherwise the diamond core drill will burn.
  • 🔹DurabilityDiamond dust coating offers superior performance and cutting strength.Extended service life.This diamond drill bits are high quality and good performance that excellent for making clean and accurate hole.
  • 🔹Dimension Hole Diameter: 50mm(2") Shank Size(Approx): 10 x 25mm(3/8" x 1")(D*L) Total Length: 55mm(2-11/64")
  • 🔹Drilling MethodStart drill at 45 degree to surface and align to 90 Degree as hole forms.
  • 🔹Applicable MaterialsThis diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or other.


Buy 2 inch diamond drill bit from Amazon.com


Stadea CBD112N 2 Inch Concrete Core Drill Bit Diamond Hole Saw Bit For Concrete Brick Block Stone Masonry , Laser Welded Wet Dry 1 1/4-7 Thread

Buy 2 inch diamond drill bit
Check Price on Amazon
Buy 2 inch diamond drill bit from Amazon.com

Description:

Stadea Series Super C, 2 inch diamond core bits 14 inch high are designed for coring cutting hard concrete, concrete with rebar. It has 1 1/4"-7 thread that fits known brand core rigs for concrete coring. The core barrel is 14 inch long, the diamond segments are Laser-weleded for stonger bond. It works effectively on cutting hole in hard concrete, rebar concrete, hard stones, bricks, blocks, mansonry and other hard surfaces.

About STADEA
STADEA offers industrial diamond tools, power tools, and wide range of tools accessories. STADEA durable, aggressive diamond tools are used by natural stone fabrication shops, artificial stone manufacturing shops, DIY worldwide.
STADEA trademark is owned by ePortal LLC, Santa Clara CA. STADEA trademark is owned by ePortal LLC, Santa Clara CA.

Buy 2 inch diamond drill bit from Amazon.com
  • 2 Inch Diamond Concrete Core Drill Bit Hole Saw, 14 Inch high Designed for drilling hard Concrete, Rebar, masonry, hard brick, Granite, and other hard materials
  • Laser Welded Diamond Segments for extra joint strength needed to cut hard concrete and other hard materials effectively
  • 14" High tube length, with 1 1/4"-7 arbor, Fit known brand core drill rigs
  • Designed to cut either in wet or dry use, for longer life span use wet
  • 5 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 3.5 MM thick and 24 MM wide
Buy 2 inch diamond drill bit from Amazon.com


Concord Blades CBW02000SP 2 Inch Wet Concrete Diamond Core Drill Bit

Buy 2 inch diamond drill bit
Check Price on Amazon
Buy 2 inch diamond drill bit from Amazon.com

Description:

2 Inch Wet Concrete Diamond Core Drill Bit with 14 Inch Tube Length is used by professionals to do a quick cut into concrete with laser welded segments that contain high concentrations of top quality diamonds. This, combined with a special blend of metal powders, will help to deliver extremely fast cutting and long life in a variety of materials including concrete, cured concrete with heavy reinforcement and hard masonry materials. The newly designed Pro-U segment has double-pointed tips to penetrate quickly and hold a straight drilling path to reduce side drag, and also increases water flow to reduce heat and to remove slurry more efficiently. This concrete core bit is used for general purpose wet drilling on cured concrete with hard aggregate and medium to heavy steel reinforcement, and asphalt overlay on concrete using either a Handheld Core Drill or a Core Drill Rig.

Buy 2 inch diamond drill bit from Amazon.com
  • 10 mm segment height, 3.5mm Segment Width, 1-1/4" -7mm Arbor
  • Use Wet Only
  • This core bit is used for wet drilling on cured concrete with hard aggregate and medium to heavy steel reinforcement, and asphalt overlay on concrete
  • Does not come with a pilot bit
  • 14" tube length
Buy 2 inch diamond drill bit from Amazon.com


2 inch diamond drill bit

0 Comments about ā€ž2 inch diamond drill bitā€œ

Leave a message

Your email address will not be published. Required fields are highlighted *