Rugged Ridge 11503.95 CB Radio Mount for 2007-2018 Jeep Wrangler JK Models
Are you looking to install a CB radio in your Jeep JK Wrangler in an accessible area? The Rugged Ridge CB radio mount offers you this easy to install solution. The CB radio mount conveniently mounts over the rearview mirror for an easy reach. Made from durable black powder coated steel, now your CB is attached high and within reach without having to take your eyes off the road or trail. Minor drilling required for 07-10 JK Wrangler, no drilling required for 11-up JK Wrangler.
- Mounts directly to factory footman loop
- Hooked end to secure CB handset cord
- Convenient position for your CB radio
- Limited 5 Year Warranty
Sirio Antenna Sirio 2016 (26.4-28.2 Mhz) 5/8 Wave 3000 Watts Tunable 10M & CB Base Antenna
The most modern technology and the most advanced instruments have been used for realization of SIRIO 827, the new base antenna with remarkable characteristics. It is made of silicium magnesium aluminum tubes of big dimensions drawn and cemented on the surface to get the maximum strength of the main whip. The coil, made of enamelled copper wire of big section, has been specially planned in order to bear high powers. It adopts the exclusive System C.A.C.S. (coil auto-cooling system) which allows the auto-cooling by a finned support that keeps the coil hanging up allowing the air circulation. Engineered with the most advanced available technologies it is completely manufactured in Italy with high quality materials. The new design of the radiant element (patent pending) works like a central feeded dipole so all RF currents on the radiator are in-phase and the ground plane radials are not necessary. The coaxial coil at the bottom works like RF-choke for the optimum decoupling from mast and feeding line. Made of telescopic fiberglass tubes, it is DC-grounded for the best protection from static discharges.
- Base station antenna, omnidirectional high power handling capability low radiation angle
- Equipped whit excellent multi element ground plane protection from static discharges DC-ground made of aluminum alloy 6063 T-832
- Type: 5/8 ground plane Frequency range: tunable from 26.4 to 28.2 MHz
- Max. power: 1000 Watts (CW) continuous 3000 Watts (CW) short time Feed system / position: Transformer DC-ground / base Connector: UHF-female
Uniden Atlantis 150 Handheld Floating WaterProof IPX8/JIS8 Level Submersible Two-Way VHF Marine Radio. 1/2.5 Watt. Lightweight Design, 10 Hour Battery Life, and Battery Save Mode., White
Lindy Lwtkm59 Wally Talker 1/4oz. Radio. Atlantis 150 # Atlantis 150. Brand name Uniden. Radios VHF hand held. Item weighs 1.2 pounds.
- Floating, Lightweight Design
- 1/2.5 Watt TX
- US, Canada, and International, Marine Channels
- NOAA Weather Alert
YBERLIN CB Mic Holder Mount Hand Held Microphone Radio Mounting for Jeep Wrangler JK 2011-2018 Passenger Grab Bar
When it comes to our customers' satisfaction, we have one rule: settle for nothing but the best.
That's why we work only with premium quality products and manufacturers,
that are guaranteed to deliver to our high expectations.
Why should you order this product?
Nothing Worse Than A Wandering CB Mic. Don't Let That Happen To You!
keeps your Handheld Microphone in the perfect position in reach and visible to the driver while being out of the way for the passenger and Safely Stored Inside This Bracket
Some of the great features of this product:
The high-quality metal material, sturdy construction;
Simple Neat design;
Ideal for Handheld Microphone
Standard size, perfect to fit; Fits Jeep Wrangler JK Models 2011-2018 (NOT for 2007-2010 Models) and Mic Holder with Round Button Type Clips Clamp (like Cobra 75WXST CB Radios)
Easy Install, user-friendly;
ADD TO CART NOW and you'll be solving this irritating problem with minimum investment!
- What You Need: Is The Lack of Handheld Microphone Mounting Bracket In Your Car An Inconvenience Most of The Time? Would You Like A Cost-effective, Practical and Immediate Solution To This Problem? We Have Exactly What You Need!
- Stable Metal Mic Bracket: Keeps CB Microphone In The Perfect Position In Reach and Visible To The Driver While No Worries, As They Will Always Be At Hand's Reach and Safely Stored Inside This Bracket
- Simple Neat: No Cutting, Drilling, Sticking. Retain the Value of your Vehicle. Not Take Up The Limited Room In The Jeep Cab Dashboard and Console Moreover Out of The Way That Will Not Interferes with Passenger Comfort.
- Easy Install: Standard Dimensions Are Specially Designed for Passenger Grab Bar Insertion Fits Jeep Wrangler JK Models 2011-2018 (NOT for 2007-2010 Models) and Mic Holder with Round Button Type Clips Clamp (like Cobra 75WXST CB Radios)
- Package & Warranty:1 CB Radio Mic Mount, 1 Side Spacer. for 12-Months After The Date of Purchase CB Mic Mount Holder, We Take Care of All Quality-related Issues. Please Contact Our Support Team At Any Time.
BCP Jeep Spare Tire CB Radio Antenna Mount Bracket for Jeep Wrangler Unlimited Rubicon Sahara JK 2/4 Door 2007-2016
Fits Behind The Spare Tire of 2007-2016 Jeep Wrangler Unlimited Rubicon Liberty Sahara Jk 2/4 Door
- Material: Metal
- Package Included:1-piece
- It is easy to install and not need to require drilling.
- Heavy Duty JEEP Specific Mount For CB, Amateur Radio and Scanner Antennas
- Fits Behind The Spare Tire of 2007-2016 Jeep Wrangler Unlimited Rubicon Liberty Sahara Jk 2/4 Door
Areyourshop Car CB Raido Microphone Mounting Holder Clip Grab Bar Mount For Cobra 75WXST MOUNT Wrangler JK 2011 2012 2013 2014 2015 2016 2017& UP
The CB Radio Mount allows you to mount any number of devices directly adjacent to the in-dash stereo.
There is no drilling or any other mods necessary to install the CB Radio Mount.
The CB Radio Mount can be installed in just a few minutes and it is very rigid - allowing you to mount a cell phone, MP3 player, or a CB Microphone in a very visible and easily reachable location.
With this optimum mounting location, safety is actually improved as you can avoid looking or reaching for a device that is out of your sight.
The CB Radio Mount ships with pre-drilled holes for the Cobra 75WXST microphone clip (no include clip).
To mount other devices, simply mark and drill the CB Radio Mount prior to installing it and you will have an excellent, easy-to-install, versatile bracket!
No Installation Instruction
Note: This bracket is only suitable for cars with left-hand drive position. The car with the right-drive position is not applicable. Please confirm the purchase without any error.
For Cobra 75WXST CB Radios
Fits Jeep Wrangler JK Models 2011-Present
Note: Don't Fit Jeep Wrangler JK 2007-2010
1 x Black CB Radio Mic Mount Holder
1 x Iron Clip (Include Screw)
Iron Clip Separate
For Yeasu Series
- For Cobra 75WXST CB Radios
- Fits Jeep Wrangler JK Models 2011-Present
- Iron Clip Separate For Yeasu Series FT-1807/FT-1907/FT-7800/FT-7900/FT-8900/FT-8800 also
- Package includes: 1 x Black CB Radio Mic Mount Holder 1 x Iron Clip (Include Screw)
- To mount other devices, simply mark and drill the CB Radio Mount prior to installing it and you will have an excellent, easy-to-install, versatile bracket!
Red Hound Auto Spare Tire CB Radio Antenna Mount Compatible with 2007-2018 Jeep Wrangler JK Flag Bracket 2 or 4 Door
Red Hound Auto Premium heavy duty Spare Tire CB Antenna Mount, designed tough and made from the highest quality materials. Product is backed by a no-hassle 1 year guarantee against defects. Constructed of premium Heavy Duty Steel; made durable, and ready to handle tough environments. Designed custom to fit: 2007-2018 Jeep Wrangler 2 or 4 Door models NOTE: Does not include new model 2018 JL. Includes: 1 bracket
- 1 Spare Tire Flag CB Antenna Mount Bracket (mounting hardware not included) custom designed for 2007-2018 Jeep Wrangler JK/JKU 2 and 4 door models: NOTE: Does not include new model 2018 JL.
- Bracket measures approximately 3-3/4" x 4-1/4"; antenna tab extends about 1-3/4" away from vehicle
- For CB, scanner or amateur radio antennas; bracket mounts directly to the factory tire carrier to position the antenna behind the spare tire keeping it protected
- Contructed of Premium Heavy Duty Steel and factory tested to ensure it will handle the toughest conditions
- Installation is quick and easy; no drilling reqired
SUNPIE JK CB Mount Overhead CB Radio Mount for Jeep Wrangler 2007-2018 (Over Rearview Mirror CB Mount Accessories)
If you are looking for a CB radio mount for your Jeep JK models, this JK CB mount is a good solution to meet your need, without taking up the limited precious cab space. Mounted directly to factory footman loop over rearview mirror, makes it easy to reach.
- The over-head JK CB radio mount is finished in a tough black powder coat durable steel
- Easy access, this over rearview mirror CB mounting bracket keeps your CB within reach and save you the limited cab space
- Simple clean install, no drilling required for 2011 and up JK (minor drilling for 07-10 JK models), mounts directly to factory footman loop.
- Designed specifically for 07-18 Jeep Wrangler JK & 2018 JL models 2 door and 4 door and works with most CB radios available on the market
- Comes with durable hardware accessories for installation including locking hex nuts for a secure fit
AMOUTOR CB Mic Mount, Jeep Wrangler JK 2011-2018 Passenger Holder Grab Bar, Microphone Mounting Bracket
Our Microphone Mounting Bracket is placed in front of you,avoidng you to lower your head, and you can liberate your hands and use the phone conveniently when you are driving.
Nothing wworse than a wandering cb mic, don't let that happen to you, Choose it!
1. High-quality metal material, sturdy construction.
2. Simple Neat design.
3. Easy to install
1 x Black CB Radio Mic Mount Holder
1 x Right Side Spacer
We value happy experience and 100 satisfaction of each customer, hence, we are very grateful to have a chance to get any suggestion and information from you, So please feel free to let us know if you have one.
- SAY GOODBYE TO CHAOS - Our metal mic bracket can keep the CB microphone in a perfect position stably, and also can be used to provide a sturdy base to mount a mobile phone holder to when you are not using the mic. Let the comfort and cleanliness of the car get an improvement, it have Exactly what you need
- CUSTOM-DESIGNED - This bracket can be used for microphones with standard round button clips for Jeep Wrangler JK models 2011-2018 (not for 2007-2011 models). Just need to confirm the model number before buying. 1 CB radio Mic bayonet, 1 right side gasket
- HIGH GRADE IRON - Our cb raido mic mount made of high grade iron,sturdy and durable, clean look not take up the limited room in the jeep cab dashboard and console moreover out of the way
- EASY TO INSTALL - No Cutting, Drilling, Sticking, just simple enough to install with pre-drilled holes. There are no complicated instructions on how to use this product because it is as easy as 1 2 3
- EASY TO USE - Installed to your factory passenger side grab handle on the dash, makes the Mic in view and conveniently accessible when wheeling on the trail, out of the way. convenient for the driver and does not affect the comfort of the passenger
Jeep Spare Tire CB Antenna Mount for Jeep Wrangler Unlimited Rubicon Sahara JK 2/4 Door 2007-2018
Color : Black color
Please verify that this kit fits your vehicle before purchase
It is easy to install and not need to require drilling.
It is custom designed to fit Jeep Wrangler JK 2 & 4 DOOR MODELS 2007-2018
It is crafted from high quality Prime 304 stainless steel and will not rust, corrode or peel.
- Heavy Duty JEEP Specific Mount For CB, Amateur Radio and Scanner Antennas
- Brand new and easy to install
- Fits Behind The Spare Tire of 2007-2018 Jeep Wrangler Unlimited Rubicon Liberty Sahara Jk 2/4 Door
- Package included : 1 PC of CB antenna mount
- Made of high quality stainless steel material
- Mobil 1 5w30 5 quart
- Shark vacuum for carpet
- Sea salt
- Mid level dslr 2016
- Electric fireplace heaters
- Light beers 2018